Growing up in Ecuador, Maggi Sauce was always available at our table, and Maggi bouillon cubes were part of many of our cook’s recipes. On the odd Sunday that we didn’t have lunch out, my mom would prepare a Maggi soup (usually cream of mushroom or asparagus, being my father’s and my favorite), and there
2 Weeks ago I visited one of our patients in Germany. The hospital was close to Leipzig, and I had a few hours to stroll through town. I went to the Museum in der Runde Ecke, which documents the power and banality of the former district headquarters of the East German State Security Service or “Stasi” in
The high-gain antenna on my space communications array is based on a Fortec Star 120 cm dish. This is a high-quality, large dish designed for motorized FTA reception of analog, digital, and high-definition programs on Ku band satellites. I built a feed that combines a KU band horn for free-to-air (FTA) satellite reception with a helical feed
One of my current work-related projects required me to buy some gyroscopes for prototyping. I purchased some of the beautiful, motor-driven demonstration gyros made by Glenn Turner at www.gyroscope.com. Also as part of the project, I came across the professional-grade (and professionally priced, starting at $1,600) gyroscopic camera stabilizers made by Kenyon Laboratories. These devices
I just published three scintillation-probe related posts at www.diyPhysics.com. First is on the construction of a very simple low-pass filter to interface commercial PMT amplifiers/scintillation processors to the PRA (“Pulse Recorder and Analyser”) software MCA:
Last week I posted detailed construction information for my rubidium atomic clock frequency reference. Besides that unit, I also built a GPS-disciplined 10 MHz oscillator to serve as a secondary frequency reference, as well as a source of GPS NMEA data for my ham shack instruments that can use precise location and real-time-clock data (e.g.
Posted to diyPhysics.com: d.i.y. 10 MHz Atomic Clock Frequency Standard Using Surplus Rubidium Oscillator
I just posted on www.diyPhysics.com about my 10 MHz rubidium standard based on a surplus Efratom M-100. It is a free-standing 10 MHz +/-5×10-11 frequency standard for frequency counters, as well as a precise calibration source. I use it to keep precise track of frequency when working on Earth-Moon-Earth (EME) communications, where even tiny errors in tuning
SharkVision – A Sensing Suit for the Blind Hannah Prutchi, 8th Grade, Science, VMS, October 2011 Blind people often use canes to avoid obstacles when walking. But, these are intrusive, can only detect obstacles where they are pointed, and could be dangerous to other people. I devised the “SharkVision Suit” to help blind people move
Posted to www.diyPhysics.com:d.i.y. 250 kV High Voltage DC Power Supply with Neat Trick for Switching Polarity
I just posted at www.diyPhysics.com detailed instructions on the construction of a 250 kV DC high-voltage power supply. Although my hack for switching the polarity (referenced to ground) is simple, I am very surprised that I’ve never seen it elsewhere! The hack consists of adding one more capacitor to the Cockroft-Walton multiplier so that it can
In my dayjob as an implantable-device engineer, I often need to prototype small parts. So, after the successful modification of my home X2 mini mill to CNC, I decided to do the same to the Sherline precision micro mill that I have at work.