Cutting-edge diy projects 

Facebook Twitter Flickr LinkedIn YouTube RSS
Home Amateur Radio N2QG d.i.y. Moon Camera for EME and Radio-Astronomy Mounted on Space Communications Antenna Array
formats

d.i.y. Moon Camera for EME and Radio-Astronomy Mounted on Space Communications Antenna Array

Moon/Sky Camera mounted on David Prutchi's N2QG space communications antenna array

Our space-communicationsantenna  array includes a camera that looks in the direction that the array is pointing.  This camera helps us check that we are aiming directly at the moon during EME attempts.  In addition, when it lets us see airplanes that may be the source of interfering signals when we conduct radio-astronomy observations.

The camera is constantly aimed toward the sky, so it may eventually be pointing straight at the Sun, risking damage to the image sensor.  For this reason, we added a solenoid-actuated shutter that keeps the camera shaded at all times that we are not using it.  The solenoid requires 12VDC from our indoor power-supply to open.

In addition, we incorporated various ways of dealing with humidity and window fogging, including a 50? heating resistor, a fan to circulate air within the camera, and a large pack of silica gel.  The window heater and fan activate under the control of a condensation sensor whenever the camera is powered.

Inside the shack, a small black-and-white TV was converted to act as the camera’s monitor.

Camera mounted on N2QG's space-communications antenna array

 Ham radio shack at N2QG. (c)2012 David Prutchi, Ph.D.

 
 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn
2 Comments  comments 

2 Responses

  1. Some guy on the internet

    This comment will probably be caught in a spam filter because it has a link but there is a whole thread on 4chan blowing up which uses your antenna image. Did someone steal this photo off your site or is this you? Mirror: http://fuuka.worldathleticproject.org/b/thread/510400594/

Leave a Reply to David Prutchi Cancel reply

Your email address will not be published. Required fields are marked *


*